| Pr Code |
Description |
Image |
CC |
| READY MADE ALARM KITS | |||
|
JK-15-EN w/o RC-28 |
GSM W/L set (JA-63KRG - 2,2Ah, JA-60F, RC-86, JA-60N, JA-60P, UC-260, SA-200, all batteries included) |
 |
1 |
|
JK-06-EN PROFI TEL kit
w/o RC-28 |
TEL W/L security set (JA-63KRX, JA-60F, RC-86, JA-60N, JA-60P, UC-260, SA-200, all batteries included) |
 |
1 |
| JK-16 |
Basic W/L set (JA-63KR - 2,2Ah, JA-63F, RC-44, JA-60N, JA-60P, UC-260, SA-200, all batteries included |
1 | |
| JK-16+JA-65X |
TEL wireless security alarm set (JA-63KR - 2,2Ah, JA-63F, RC-86, JA-60N, JA-60P, UC-260, SA-200, all batteries included) with telephone line communicator JA-65X (communicator packed in separated box) |
1 | |
| JK-16+JA-60GSM |
GSM wireless security alarm set (JA-63KR - 2,2 Ah, JA-63F, RC-86, JA-60N, JA-60P, UC-260, SA-200, all batteries included) with GSM communicator JA-60GSM (communicator packed in separated box) |
1 | |
| JK-16+JA-60WEB |
LAN wireless security alarm set (JA-63KR - 2,2Ah, JA-63F, RC-86, JA-60N, JA-60P, UC-260, SA-200, all batteries included) with LAN communicator JA-60WEB (communicator packed in separated box) |
1 | |
| JA63KRG Profi |
The JA-63KRG "Profi" GSM alarm control panel is an advanced version of the JA-63KR “PROFI” hybrid control panel. The JA-63KRG is equipped with a built-in GSM communicator, which enables detailed alarm communication to monitoring stations or to users’ mobile phones. It also allows remote control and programming from any phone or from Internet. The GSM dialer provides additional communication features like phone calls, short text messaging or Internet access for a connected PC via GSM. Can be controlled & Programmed via a JA-60E Wired K/P or JA-60F Wireless K/P. It enables remote control of electronic appliances in a house, too. Battery 1.3 AH included. |
 |
1 |
| JA-63KRX Profi |
Model JA-63KR (equipped with the "R" radio communicating module) has 16 wireless zones. Up to two JA-60 detectors can enrolled into each zone (totally 32 as a maximum). In total model 63KR has 20 zones (4 wired and 16 wireless). Up to 8 wireless controllers (remote controls or wireless keypads), a JA-60A wireless siren and unlimited number of UC family wireless output modules can be enrolled as well. If more zones are required, another JA-6x control panel can be enrolled as a subsystem (Master & Slave architecture). The master control panel receives information from the sub control panel and it can also arm and disarm the subsystem panel. Telephone module "X" can communicate with a Monitoring Station, send two voice messages, send five SMS messages via SMS server (or dial a numeric Pager) or. It can also communicate with a remote PC (using ComLink SW and a JA-60U modem). Battery 1.3 AH included. |
|
1 |
| JA-63KR WO BAT |
Model JA-63KR (equipped with the "R" radio communicating module) has 16 wireless zones. Up to two JA-60 detectors can enrolled into each zone (totally 32 as a maximum). In total model 63KR has 20 zones (4 wired and 16 wireless). Up to 8 wireless controllers (remote controls or wireless keypads), a JA-60A wireless siren and unlimited number of UC family wireless output modules can be enrolled as well. If more zones are required, another JA-6x control panel can be enrolled as a subsystem (Master & Slave architecture). The master control panel receives information from the sub control panel and it can also arm and disarm the subsystem panel. Battery 1.3 AH included. |
|
1 |
| JA-63K Profi |
The JA-63 "Profi" is a fully
programmable control panel with building block architecture. By programming,
it can be split into two separately operated sections (with a shared
section). It has a built in power supply and there is ample space for a back
up battery (12V, 1.3Ah or 2.6Ah) in the control panel case. |
|
1 |
|
MAESTRO CONTROL PANEL |
|||
| JA65-K MAESTRO |
The JA-65 is a fully programmable control panel with building block architecture. This allows the JA-65 to be tailored to particular installation requirements. The Maestro can operate as a wireless, wire operated or combined system. It can work with 16 wireless detectors and can have 8 or 16 hard wire zone inputs. An additional JA-60 or JA-65 subsystem control panel can expand the system. The control panel can be split in to 2 independent sections with a shared common area. |
 |
1 |
|
JA-65H Manual |
For a hybrid system use all modules (with one module JA-65H you have 8 wired zones, with 2 modules – 16 wired zones). If you need only 8 hard wired zones with a communicator, you buy JA-65K + JA-65H + JA-65X. Combination of JA-65K + JA-65R + JA-65X gives you a pure wireless control panel. |
 |
1 |
| JA-65R |
Maestro radio module, 16 wireless zones |
 |
1 |
| COMMUNICATOR MODULES AND MODEM FOR PROFI AND MAESTRO PANELS | |||
| JA-60GSM |
The JA-60GSM dialer is constructed for JA-60, 63 and 65 alarm control panels. The dialer is used for communication via GSM. Appropriate GSM provider is chosen by inserted SIM card. |
 |
1 |
| JA-60WEB |
LAN communicator for Comfort, Profi and Maestro control panel |
1 | |
| JA-65X |
Combined digital & voice dialer module for Maestro and Profi |
 |
1 |
| JA-60U |
The JA-60U modem is used for the remote connection of a personal computer with Comlink software to a JA-60KX control panel using a public telephone line. It enables a computer to remotely control a JA-60KX in the same way as when it connected directly to the JA-60KX PC's output. |
 |
1 |
|
Wireless and Hard-Wired Keypads |
|||
|
JA-60E
|
The JA-60E is an optional keypad for the JA-60 wireless alarm system. It can operate and program the system in exactly the same way as the built-in keypad on the control panel. It is connected to the control panel by a cable. Up to two keypads can be connected to a single control panel. The alarm system's status is indicated by the LED indicators, the built in display and built in buzzer. |
 |
1 |
| JA-60F |
The JA-60F is an optional wireless keypad for the JA-60 or JA-65 series wireless control panel. It can operate the system in exactly the same way as the built-in keypad on the control panel and as the hard wired bus system keypad, JA-60E. The LED indicators, display and built-in buzzer indicate the alarm system's status. |
 |
1 |
| JA-63F |
W/L keypad for JA-63 PROFI and JA-65 MAESTRO control panels, allkaline batteries included |
11 | |
| JA-63E |
Hard-wired keypad for JA-63 PROFI and JA-65 MAESTRO control panels |
1 | |
| WIRELESS REMOTE CONTROLS & BUTTONS FOR PROFI AND MAESTRO PANELS | |||
|
RC-86 New Item |
Key-fob 4 buttons, DUAL band, can set, unset and trigger panic alarm. Can also operate other devices - wireless relay modules, car alarm systems in 433MHZ or 868 MHZ, 6V alkaline battery included, RC-86K black housing, RC-86W white housing. |
 |
1 |
| RC-11 |
Key fob remote controller, 2 buttons - black colour |
 |
1 |
| RC-22 |
The RC-22 remote control is designed to work with Jablotron's controllers (UC-216, UC-222) and/or the JA-60 wireless security system. It can be used in two different modes: a two button remote controller or as a panic button. A high level of radio security is insured by sophisticated radio coding with a rolling code and anti-scanning features. |
 |
1 |
| RC-28 |
The RC-28 is designed to be used as a wireless door bell button. It works with the UC-260 receiver as well as the UC-216, UC-222 and the UC-280 receivers. |
 |
1 |
| RC-60 |
The RC-60 is designed to wirelessly control Jablotron control panels via 3rd party wired access control devices (e.g. proximity cad readers, mechanical locks with switches etc.). The RC-60 converts control signals from these devices into the wireless control signals accepted by the JA-60, JA-63 and JA-65 control panels. Additionally, it can be used to trigger UC-2xx receivers for various home automation applications. There are two input terminals (A & B) as well as a tamper input. The tamper signal is transmitted if the RC-60 is opened or removed from the wall. |
 |
1 |
|
PLV-RC711 New Item |
Plastic housing for RC-86, B - white housing |
1 | |
|
PLV RC New Item |
Set of empty RC-x housings in multi colours and types - housings only |
1 | |
| WIRELESS DETECTORS for PROFI and MAESTRO PANELS | |||
| JA-60N |
JA-60N magnetic door detector is equipped with a magnet. A movement of the magnet triggers the internal sensor in the detector. It can trigger an Instant or Delayed intruder alarm and it also has built in tamper sensors. There are inputs for external sensors available. The JA-60N uses a sophisticated radio communication protocol with a high level of data safety. The detector makes regular auto testing and reports its conditions regularly to the system for full supervision. An automatic testing mode makes testing an ease. |
 |
1 |
| JA-60NB |
W/L magnetic door contact with external input, AAA batteries included; brown colour |
||
| JA-60IR |
wireless optical infrared barrier for indoor/outdoor application. Rang 5 mtr |
 |
|
| JA-60P |
The JA-60P is an intruder detector designed to detect human body movement in a protected area. Digital processing insures a high immunity to false alarms and outstanding stability. The JA-60P uses a sophisticated radio communication protocol with a high level of data safety. The detector makes regular auto testing and reports its conditions regularly to the system for full supervision. |
 |
1 |
| JA-60V |
Wireless outdoor PIR Detector |
 |
3 |
| JA-60B |
The JA-60B is a modern wireless glass break detector that provides easy and reliable protection against robbery. It ensures extremely high reliability and false alarm immunity. One sensor covers an entire room, regardless of the number of windows. A dual technology detection method (air pressure and sound analysis) is combined with digital processing to guarantee high sensitivity to the breaking of glass. |
 |
1 |
| JA-63S |
Wireless optical smoke detector with IR remote testing feature, EN 14 604, EN 54-5, AA batteries included |
 |
|
| JA-60G |
The JA-60G detects all mixtures of air and combustible gas (Natural Gas, Methane, Propane, Butane, Acetylene, GPL, Hydrogen, etc). The detector detects two levels of gas concentration, responding with two different output reactions. The main detector features are: high reliability and sensitivity, com-pact size, 230V (110V optional) power supply and long stability & lifetime. It has a built-in transmitter to wirelessly send an alarm signal. |
 |
1 |
| WIRELESS SIRENS FOR PROFI AND MAESTRO PANELS | |||
|
JA-63A
|
w. backup outdoor siren, DE20-15 adapter, back-up battery |
 |
1 |
| UC-260 |
The UC-260 can be used as a wireless indoor siren, a melody doorbell or as a chime. It can also function as a small house alarm. The UC-260 is compatible with Jablotron wireless control panels (JA-60 and JA-65), JA-60 wireless detectors and RC-11, RC-22 and RC-28 remote controls. Several triggering devices can be used simultaneously and different melodies can be assigned to each device. Two different sound levels can be selected. The UC-260 provides entrance and exit delay chirps too, when used with a control panel. |
 |
1 |
| UC-261 |
New Indoor Wireless siren Now with transmitter (including chime & door bell function), 230 VAC plug in model for EU (other plugs optional) |
 |
1 |
| WIRELESS RELAY MODULES FOR PROFI AND MAESTRO PANELS (Can work with JA detectors & RC Control) | |||
| UC-216 |
The UC-216 is a three channel
receiver of coded signals. The status of two output relays and the output
transistor is indicated on the front panel. Up to 20 remote controls (RC-11
or RC-22) can be taught to the unit. There are three different operating
modes available for each remote control. |
 |
1 |
| UC-222 |
The UC-222 unit is powered by 230 V
AC. Its output relay contact operates at 230VAC. Up to 30 remote controls
(RC-11 or RC-22) can be taught to the unit. There are four different
operating modes available for each remote control. |
 |
1 |
| OPTIONAL ANTENNAS FOR WIRELESS SYSTEMS | |||
| AN-01A |
Optional wire antenna for JA-60 accessories |
 |
1 |
| AN-02A |
Self adhesive antenna for PG-4 |
 |
1 |
| AN-03A |
Optional dipole outdoor antenna for JA-60 accessories |
 |
1 |
| AN-04 |
GSM antenna forJA-60GSM 900/1800 MHz, magnetic 58 cm |
 |
1 |
| AN-05 |
GSM antenna for JA-60GSM 900/1800 MHz, magnetic 37 cm |
 |
1 |
| AN-06 |
GCF001 antenna for JA-60GSM 900/1800 MHz with glue strip |
 |
1 |
| AN-07A |
Optional internal adhesive antenna for JA-63 Control Panel |
 |
1 |
| AN-09 |
Car alarm antenna GSM/GPS suitable for car roof installation |
 |
1 |
| AN-reduction |
Optional internal adhesive antenna for JA-63 control panel |
1 | |
| Access Systems | |||
| AS-80 |
Access system - control unit, compatible with keypads JA-80H (JA-80N) - not included |
 |
1 |
|
RP-01 New Item |
Access system - control unit + RFID card / key fob (PC-02 and PC-02) reader. Data connection via the RS-485 bus. |
 |
1 |
|
SW-01 New Item |
Interface and SW for RP-01, enables connection to the PC and allows to setup, manage and control RP-01 access system |
 |
1 |
| SMS PHONES | |||
| SP-02 |
The SP 02 half-duplex speaker phone allows a caller (user, an alarm receiving centre operator etc) to talk and listen-in to the monitored premises. The device can also be used for emergency calls by pressing a button. The SP 02 should be connected to a communicator equipped with a simulated telephone line (e.g. JA 80Y, JA 60GSM) or to an analogue phone line. |
||
| HARD WIRED DETECTORS | |||
| JS-20 LARGO |
This P.I.R. motion detector is used to protect interiors. It detects any movement of objects with a temperature close to that of the human body. The signal from the sensor is electronically analyzed. This ensures that the detector provides excellent sensitivity and at the same time false alarms are basically eliminated. The detection analysis rate can be adjusted to increase its immunity if the JS-20 is installed in a problematic location. |
 |
1 |
| JS-25 COMBO |
The JS-25 COMBO is an outstanding "two in one" detector, which dramatically simplifies alarm installations.. This detector combines two sensors (P.I.R. motion & acoustic glass break) in one housing. It provides three independent outputs (P.I.R. alarm, glass break alarm and tamper). |
 |
1 |
|
JS-22 New Item |
DUAL PIR detector. Uses Two Sensors ensuring better immunity against triggering by moving pets.Detection analysis can be adjusted to increase its immunity (if installed in a problematic location). Detection range up to 12m/120 degrees |
 |
1 |
| GBS-210 VIVO |
The GBS-210 glass break detector detects the breaking of glass windows. A dual technology detection method (air pressure and sound analysis) is used. Used processing guarantees high sensitivity to the breaking of all types of glass. The sensitivity can be adjusted to compensate for various window sizes and mounting distances. The GBS-210 distinguishes itself with outstanding RF immunity. A built in LED indicator allows for easy testing and it also provides an optional alarm memory feature. |
 |
1 |
| GS-133 |
The GS-133 detects all mixtures of air and combustible gas (Natural Gas, Methane, Propane, Butane, Acetylene, GPL, Hydrogen, etc). The detector detects two levels of gas concentration - with corresponding output reactions. The main GS-133 features are: high reliability and sensitivity, compact size and long stability & lifetime. |
 |
1 |
| GS-130 |
The GS-130 detects all mixtures of air and combustible gas (Natural Gas, Methane, Propane, Butane, Acetylene, GPL, Hydrogen, etc). The detector detects two levels of gas concentration - with corresponding output reactions. The main GS-130 features are: high reliability and sensitivity, compact size, 230V (110V optional) power supply and long stability & lifetime. |
 |
1 |
|
SD-280 New Item |
Optical smoke detector with temperature sensor, piezo siren. EN 54-5 and EN 14 604 |
 |
1 |
| SD-401 | Stand alone optical smoke detector with temperature sensor, piezo siren. EN 54-5, EN14 604 | 1 | |
| SD-728V-1 | Stand alone Smoke Detector. The SD-728 is a new stand-alone smoke detector used to detect fire hazards in interior residential or non - industrial commercial building. It is powered by a 9 V alkaline battery (1 year battery lifetime) and has a built-in warning diren(85db/3m) and red LED. It uses an optical smoke detector, working on the principle of scattered light. Its dimensions are: diameter 103mm, height 40mm. It meets the requirements of BS EN 14 604, EN 50130-4, and EN 550022 | ||
| LD-63HS |
Overflow alert det,w,built in siren relay c, |
1 | |
|
LD-12 |
Flood detector NC,NO | 1 | |
|
LD-81 |
Flood detector for JA-81M, JA-80M and JA-60N, NC | 1 | |
| DETECTORS ACCESSORIES | |||
| GBT-212 |
The GBT-212 is designed for the testing of acoustic glass break detectors. It detects the air pressure changes caused by the flexing or bending of glass and then automatically generates sound imitating the breaking of the glass. It is also possible to trigger the sound manually using the test button. |
 |
1 |
| JS-7904 |
Corridor lens for PIR detectors, 25 meters |
 |
1 |
| JS-7906 |
Pet lens - horizontal curtain lens for JA and JS PIR detector |
|
1 |
| JS-7910 |
Vertical curtain lens for JA and JS PIR detectors |
||
| JS-7902 |
Vertical curtain lens for JA and JS PIR detectors |
1 | |
| SD TEST |
Spray for optical smoke detectors testing |
 |
1 |
| SD-TH |
Test head dispenser for optical smoke detector testing (testing spray not included) |
1 | |
| HARD WIRED SIRENS | |||
| ACM-OS360 | Additional Piezo Siren for OS-360 | 1 | |
| OS-360A |
Backup outdoor piezo-electric siren, including NICd battery 4,8V; 1,8 Ah; 113dB; 118dB with ACM-OS360; suitable to use with OASIS, PROFI and MAESTRO control panels |
 |
1 |
| OS-365A |
The OS-365 is a hardwired outdoor backup siren combining a loud acoustic siren with a flashing light. The high-powered flashing light helps to lacate the sctive siren. OS-365 is equipped with a magnetic-dynamic horn siren. |
1 | |
| OS-350 | Outside piezo siren without backup |
 |
1 |
| SA-103 | Piezo Siren 12V, 110dB/m |
 |
1 |
| SA-530 |
Horn siren 117 dB/m |
 |
1 |
| SA-87LR |
Additional piezo siren for OS-360 |
1 | |
| SA-913FM |
Piezo siren 12V, 110dB/m in white plastic case with flash light |
1 | |
| SA-913M |
Piezo siren 12V, 110dB/m in white plastic case |
1 | |
| SA-606-24V |
Magneto-dynamic 24V / 112dB |
 |
1 |
| TK-34K |
Xenon strobe light blinker; amber color |
1 | |
| ACCESSORIES | |||
|
InterfaceCables for Programming |
|||
| JA-80T |
USB Interface cable for programming OASIS, Profi or Maestro control panel by using Olink or COM link SW. |
 |
1 |
|
JA-82T New Item |
USB interface cable for programming OASIS control panel by using Olink SW. No need for driver |
1 | |
| JA-80BT |
Bluetooth Interface cable for programming OASIS, Profi or Maestro control panel by using Olink or COM link SW |
 |
1 |
| WIRELESS INTERFACES FOR EXISTING HARD-WIRED CONTROL PANELS | |||
| UC-280 |
The UC-280 is an 8-zone interface linking JA-60 wireless detectors with hard-wired security control panels. It can also send triggering signals to a JA-60A wireless outdoor siren and/or UC-216 and UC-222 universal receivers. Additionally, it can receive signals from Jablotron RC-xx remote controls. If necessary, UC-282 expander modules can be used to increase the number of zones up to 40. |
 |
1 |
| TELEPHONE DIALERS AND PAGERS | |||
| TD-110 | The TD-110 is an automatic dialing device that transmits a prerecorded voice message to 4 telephone numbers to an ordinary or mobile telephone system. It can also send a numeric message to your Pager. The dialer can be triggered manually or by another device connected to the TD-110 input. The dialer can automatically call for help or to report different events. Its installation and programming is extremely easy relative to traditional dialers. |
 |
1 |
| ACESS SYSTEMS | |||
| AS-80 | Acess system-control unit, compatible with keypads JA-80H (JA-80N)- not included | 1 | |
| LOCAL PAGING UNIVERSAL GSM COMMUNICATORS | |||
| GD-06 ALLEGRO |
6 programmable inputs/outputs, SMS notification, SMS instructions, Internet access, intercom feature |
 |
1 |
| GD-04 |
4 programmable inputs, 2 relay outputs 5Amp/250V, up to 60 pre-authorized tel, Numbers for each output relay, timer switching, automatic Short Message notification and many others |
 |
1 |
| GD-04A |
Backup battery for GD-04, provides from 12 to 24 hours of back up time |
 |
1 |
| GD-04D |
DTMF modul for GD-04 |
 |
1 |
| GD-04P |
USB interface cable for programming GD-04, Must be used with GDLink SW |
 |
1 |
| GD-04R |
R. module for GD-04, OASIS radio protocol, allows to enroll 4 radio OASIS devices (detectors, remote controllers, control panels) to A-D inputs and up to 8 remote controllers to PGX/PGY outputs |
 |
1 |
| GC-61 |
GPRS communicator for Central Monitoring - converts CID phone protocol to GPRS data for CMS |
 |
1 |
| MONITORING STATION | |||
| MS-41 |
Central monitoring station telephone card - 4 phone lines |
 |
1 |
| MS-33 |
GSM/GPRS modem for MS-350 |
 |
1 |
| PC-350 |
Jablotron IP CMS, Including MS-33, CID-350, ComGuard 2.3SW, special offer if purchased with 50 control panels by one CMS provider |
 |
1 |
| POWER SUPPLIES & BACKUP BATTERIES | |||
| BP-12 | Compact BP-12 set should be used everywhere where 12V DC back-up power supply is required. The set contains: plastic case with rubber sealing (125x85x55 mm), power supply PCB, adapter DE-20-15, battery SA-214/1.3, dowels and screws. |
 |
1 |
| 6V-1.3Ah |
Rechargeable battery 6V 1,3Ah for JA-63A |
 |
1 |
| SA-214/1.3 |
Maintenance-free rechargeable lead-calcium batteries with 12V voltage . They have a long lifetime and they do not need any other care other than charging. It is possible to use the battery as a back-up power source for alarm systems but also where you need a reliable source of back-up voltage. It can work under arbitrary orientation |
 |
1 |
| SA-214/2.2 |
Rechargeable battery 12V 2,2Ah, suitable for PROFI |
1 | |
| SA-214/7 |
Rechargeable battery 12V 7Ah, suitable for MAESTRO |
1 | |
| 12v-18Ah |
Rechargeable battery 12V 18Ah, suitable for JA-83K |
 |
1 |
| SA-214/26 |
Rechargeable battery 12V 26Ah, suitable for MAESTRO |
||
| SA-214/40 |
Rechargeable battery 12V 40Ah, suitable for MAESTRO |
1 | |
| BAT-4V8 |
NiCd battery for OS-36x, 4,8V, 4*SC2 1800mA |
1 | |
| Buffer Power Supply Units | |||
| AWZ-100 |
Buffer power supply, 13,8V/1A for 1,2Ah bat. battery not included |
 |
1 |
| AWZ-200 |
Buffer power supply, 13,8V/1A for 7Ah bat. battery not included |
 |
1 |
| AWZ-300 |
Buffer power supply, 13,8V/1A for 17Ah bat. battery not included |
 |
1 |
| AWZ-333 |
Buffer power supply, 13,8V/3A digital, battery not included |
 |
1 |
| AWZ-519 |
Buffer power supply, 13,8V /2A digital, battery not included |
 |
1 |
| AWZ-222 |
Buffer power supply, 13,8V/1A for 7/17Ah battery. Controlled by microprocessor, battery not included |
 |
1 |
| AWZ-230 |
Buffer power supply, 13,8V/1A for 7Ah battery. Controlled by microprocessor, battery not included |
 |
1 |